Users should know the availability of water, air and electricity in the loctations where the pumps will be used.
A comparison of the various input requirements with the available services is neccessary in order to make an educated choice on the best type of pump to use. Installation with a hydraulic rig tends to favor the hydraulic pumps but the electric and pneumatic pumps can still be an option as they can be easily installed on most rigs and more rudimentary bolting equipment. Flexibility requirements can also affect the choice of the pump as the operator may need a pump that can be used in various environments that do not always have all the same service availability. Finally, the hydraulic and electric Swellex pumps have the lowest maintenance cost of the three types available at Atlas Copco.
Swellex HC1-L and EC1-L pumps take control for a perfect installation, every time. Bolts are not released until recommended pressure is reached for a minimum period of time to deliver best performance of the Swellex rock bolt.
Swellex HC1-L and EC1-L pumps log installation parameters, providing you with a permanent quality control record for every bolt; monitoring the safety and productivity.
Swellex HC1-L and EC1-L pumps can be used for semi-mechanized installation, separating grip and expansion functions through remote control. These pumps allow easy switching between 240 and 300 bars. They can also be used as a high pressure washer.
Equipped with data logging features, designed to assure the quality of installation.
The hydraulic Swellex pump HC1-L is designed to assure the quality of installation by controlling the inflation until the required pressure is reached. It maintains the required pressure for a set period of time to assure perfect installation of the Swellex rock bolts. The Swellex HC1-L pump offers data logging, that can be retrieved via a CANbus port or downloaded via USB or Bluetooth.
With data logging features, designed to assure the quality of installation.
The Swellex EC1-L pump offers data logging, that can be retrieved via a CANbus port or downloaded via USB or Bluetooth. It is a robust, fast and quiet high pressure pump that can be adapted to any type of rig or equipment where electricity is available. The electric Swellex EC1-L pump can be used for manual, semi-mechanised or fully mechanised bolting. They can be ordered with required current and voltage (depending on geographical location). High pressure wash and remote control features.
Pumps and installation kits are available to meet every customer's specific needs.
Designed and built to get the job done safely and efficiently.
Designed to assure the quality of installation by controlling the inflation until the required pressure is reached.
Well proven, sturdy and reliable high pressure pump.
Especially suited for manual installation where electricity or hydraulic power are not available. The PSP300 RDP is not equipped with a special valve to prevent damage to the pump when air is connected prior to water.
A robust and reliable pump.
Designed to be used with hydraulic bolting, the hydraulic pump can be used with a manual installation arm or integrated with the rig's installation system.
Robust, fast and quiet high pressure pump.
It can be adapted to any type of rig or equipment where electricity is available. The E1 pump can be used for manual, semi-mechnized or fully mechanized bolting. They can be ordered with required current voltage (depending on geographical location). They can be used with a remote control and also as a high pressure washer.